Pourquoi avez-vous besoin d'un générateur d’azote?
Série GN2 PSA           75% à 90% d’économies de coûts

à 99.9% de pureté, de 26 p.³/heure à 2 495 p.³/heure

La production d'azote peut considérablement réduire le coût de la consommation d'azote et constitue la principale raison de l'achat de la plupart des systèmes GN2.

Distributeur multi-positionnable pour compresseur d’air

• Une entrée d'air de 3/4 po
• Cinq sorties de 1/2 po
• Pression de travail jusqu'a 250 lb
• Sortie pour manomètre de pression
• Modèle exclusif à Coair

Débitmètre d'air comprimé de la série 5200

Pour sélection du modèle requis

L’échelle de capacité est d’environ la suivante : ½ pouce de diamètre = 100 P.C.M.

Le prix varie selon la capacité, le type (cuivre, acier, nylon) et la grosseur du tuyau.

Le protecteur

Analyseur de point de rosée

Analyseur de concentration d’azote

Gardner Denver PAK Series

Ecosep S

ecosep Series

Oil/Water Separators

Codrain (cliquer sur l'image pour accéder aux spécifications,pdf)

MDV-400 Motorized (cliquer sur l'image)

Accu-Drain (cliquez sur les images pour plus de détails)

Dehydra 52 & 52C

EZ-12

Robo-Drain RD11

PDV-500T Pneumatic Drain Valve

Réservoir Vertical 

Réservoir Horizontal

The following options are available - check pricing for details on which options are available on your specific model number.

• Exterior Prime ONLY
• Powder Exterior
• Enamel Exterior
• Powder Interior, Standard Primer Exterior
• Powder Interior & Exterior
• Epoxy Interior - standard Primer Exterior
• Standard Galvanize Interior & Exterior (Silvan Only)
• Premium Galvanize Interior & Exterior (Silvan Only)
• *FDA Approved Interior Lining (Silvan Only)
• **NSF Approved Potable Water Interior Lining (Silvan Only)

Système de refroidissement et de pré-filtration pour la protection d'un ensemble d'air de respiration

Le protecteur modèle ZP100-2

Comparaison d'abrasif

BROWN FUSED ALUMINUM OXIDE

Brown Fused Aluminum Oxide is the abrasive of choice when an application is sensitive to rusting caused by ferric contamination and requires an extremely aggressive and hard abrasive. Aluminum Oxide is frequently used for stainless steel fabrication, precision aviation and turbine blasting, internal pipe blasting, automotive brake pad manufacturing, and the cleaning of non-ferrous castings.

• Angular
• Mohs hardness: 9.0
• Bulk density: 105 – 125 lbs./cu. ft.
• Less than 1% free silica

CARBON STEEL SHOT

Carbon Steel Shot is a general-purpose manufactured abrasive used to remove mill scale and molding sand. Its round shape cleans by hammering the surface, leaving a uniform surface profile. Carbon Steel Shot is most commonly used in wheel blast equipment and closed circuit blast systems for steel plate blasting, cleaning castings & forgings, and ship and railcar manufacturing & maintenance.

• Round
• Rockwell C: 40 – 51
• Bulk density: 280 – 298 lbs./cu. ft.
• No free silica

CARBON STEEL GRIT

Carbon Steel Grit is a general-purpose manufactured abrasive used to remove thick coatings, heavy rust, and mill scale. It’s angular shape cleans by aggressively cutting away at the surface leaving a uniform surface profile. Carbon Steel Grit is most commonly used in air-blast rooms and mobile steel grit recycling systems and is frequently used for bridge, wind tower, and ship and railcar manufacturing & maintenance.

• Angular
• Rockwell C: 40 – 60+
  (Depending on hardness; S, M, L, H)
• Bulk density: 230 – 275 lbs./cu. ft.
•  No free silica

COAL SLAG

Coal Slag is one of the most versatile abrasives available and is generally used for the removal of thick coatings, rust, and mill scale. Coal Slag is a widely used abrasive due to its profiling ability, economical price point, and availability. Coal Slag is frequently used in new steel and steel maintenance applications such as; blasting of storage tanks, water towers, bridges, ships, structural & plate steel, offshore platforms, and oil field maintenance.

• Angular
• Mohs hardness: 6.0 – 7.0
• Bulk density: 80 – 90 lbs./cu. ft.
• Less than 1% free silica

COPPER SLAG

Copper Slag is an aggressive abrasive frequently used in new steel and steel maintenance applications. Copper Slag’s bulk density and angular shape give it an aggressiveness that provides clean, fast-cutting action, considerably increasing production rates. Copper Slag is ideal for abrasive blasting storage tanks, water towers, bridges, ships, structural & plate steel, offshore platforms, and oil field maintenance.

• Angular
• Mohs hardness: 6.0
• Bulk density: 100 – 120 lbs./cu. ft.
• Less than 1% free silica

CORN COB

Corn Cob is an organic abrasive that will clean and polish without damaging the surface. Corn Cob is used as an alternative to other organic abrasives such as Walnut Shell when there are concerns with plant oils staining the substrate or affecting coating adhesion. Common applications for Corn Cob include refinishing log homes & cedar siding, cleaning of stainless steel food processing equipment, and specialty petrochemical & offshore applications where a non-sparking, non-ferrous abrasive is required.

• Angular to sub-angular
• Mohs hardness: 4.0
• Bulk density: 24 – 33 lbs./cu. ft.
• No free silica

CRUSHED GLASS

Crushed Glass is a manufactured abrasive made from 100% recycled glass, and is ideal for concrete applications and brick & limestone restoration work. Crushed Glass’ sub-angular shape provides a uniform mil profile and cleans by cutting through mill scale and rust while providing lower particle embedment than most other abrasives.

• Angular to sub-angular
• Mohs hardness: 6.0
• Bulk density: 80 lbs./cu. ft.
• No free silica

HARD ROCK, RIVER AND BEACH GARNET

The extremely low chloride levels of Hard Rock Garnet reduces surface contamination versus Alluvial River and Beach Garnets.  The sub-angular shape, hardness, and bulk density of Alluvial River Garnet provides fast cutting, ideal for removing thin to medium thickness coatings, mill scale, and rust. Aluvial River Garnet is not exposed to chloride contamination like Alluvial Beach Garnets. Alluvial Beach Garnet’s unique characteristics improve production rates, reduce abrasive usage, and lower disposal and clean-up costs. Typical applications include blast rooms, blast yards, bridges, offshore platforms, oil refineries, pipelines, railcar shops, shipyards, storage tanks, and water towers.

• Angular to sub-angular
• Mohs hardness: 7.0 – 8.0
• Bulk density: 130 – 150 lbs./cu. ft.
• Less than .5% free silica

GLASS BEADS

Glass Beads will clean metal parts without etching the surface. Glass Beads are commonly used for automotive restoration, polishing of castings, stainless steel fabrication, and light deburring of precision parts. Glass Beads are most commonly used in abrasive blast cabinets.

• Round
• Mohs hardness: 5.0 – 6.0
• Bulk density: 80 – 90 lbs./cu. ft.
• No free silica

PLASTIC MEDIA

Plastic Media is a soft, subangular abrasive widely used as an alternative to chemical or hand-stripping. It is commonly used in the removal of powder coatings, the cleaning of molds, automotive restoration, and the air-blasting of soft or thin metals, such as aircraft aluminum.

• Angular to sub-angular
• Mohs hardness: 3.0 – 4.0
• Bulk density: 40 – 60 lbs./cu. ft.
• No free silica

STAINLESS STEEL SHOT

Marco stainless steel shot is a high quality cast stainless steel shot. This abrasive is used for cleaning aluminum and other non-ferrous castings and forgings. Stainless steel shot can leave a surface free of contamination that causes rust.

• Round
• Available in 55 lb. bags
• Available in sizes 30-60
• No free silica

STAUROLITE

Staurolite is a general-purpose mined mineral abrasive used to remove thin coatings, rust, and mill scale. Its sub-angular shape is ideal for applications where a minimal surface profile is required. Staurolite is excellent for achieving a near white finish and is commonly used for new steel applications; including storage tank & tower construction, structural & plate steel blasting, and steel fabrication.

• Sub-angular
• Mohs hardness: 7.0
• Bulk density: 125 – 135 lbs./cu. ft.
• Low free silica

WALNUT SHELLS

Walnut Shells are an organic abrasive commonly used to polish and clean soft metals, fiberglass, wood, and stone. Specific applications include fire & smoke remediation, graffiti removal, brick restoration, automotive restoration and specialty petrochemical or offshore applications where a minimal sparking, non-ferrous abrasive is required.

• Angular
• Mohs hardness: 3.0
• Bulk density: 32 – 45 lbs./cu. ft.
• No free silica